Products — series
FlexAtec — sealed & flexible movement joints
The family
Systems, and where each one goes
Seal joints for runs that must stay closed while they move. The FlexAtec 1200 is made here, at 25 and 50 mm; the 1000 and the 1210 and 1220 deck seals are supplied to order from the Vexcolt group. Section drawings are illustrations, not shop drawings.
Sealed & flexible movement joints
FlexAtec model range
Sealed joint systems for watertight and high-movement applications — floors, walls and facades where the joint must flex and keep water out.
Download the FlexAtec brochure (PDF)
| Model | Variants | Expansion gaps | Technical data sheet |
|---|---|---|---|
| FlexAtec-1000 | A01 | 20 – 100 mm (3/4-4”) | Download TDS ▼ |
| FlexAtec-1200 | A01 | 25 – 75 mm (1-3”) | Download TDS ▼ |
| FlexAtec-1210 | A01 | 25 – 100 mm (1-4”) | Download TDS ▼ |
| FlexAtec-1220 | A01 | 25 – 100 mm (1-4”) | Download TDS ▼ |
Gap ranges are taken from the current Vexcolt technical data sheets. Movement capacity is gap- and variant-dependent — always confirm against the TDS for your model, or send us your drawings.
Not sure which model applies?
Send us your drawings and movement requirements — we'll return a joint schedule with the right system per location.